Uneven Sidewalk & Trip Hazard Repair

Concrete Leveling That Restores Safe, ADA-Compliant Walkways

Polyjacking eliminates uneven sidewalks and trip hazards in Kansas City. ADA-compliant lifts, no demolition, typical cost $700–$1,000 per panel.

Quick Answer

Sidewalk Leveling, Plainly Explained

Uneven sidewalks form when concrete slabs settle at different rates. Polyjacking lifts settled panels using expanding polyurethane foam, eliminating trip hazards and restoring smooth, ADA-compliant walking surfaces — usually in under an hour per panel.

Trip hazards aren’t just inconvenient. They’re a safety risk and, for property managers, a liability and ADA compliance issue.

Precise Lift

Match the height of adjacent panels exactly.

ADA-Compliant

Eliminates the elevation differential cleanly.

No Grinding

Addresses the soil cause, not just the surface.

15–30 Min

Same-hour use after the lift.

1/10th Weight

Far lighter than cement slurry.

5/8" Ports

Small holes, patched flush.

Long-Term

Outlasts cement-based lifting in clay.

Why Sidewalks Settle

Common Causes We See

Concrete driveway leading to a two-car residential garage — typical driveway slab polyjacking restores

Soil Erosion

Water cutting beneath panels over time, washing out subgrade.

Close-up of a cracked sidewalk seam between concrete panels — the kind of trip hazard polyjacking eliminates

Tree Root Displacement

Roots pushing soil against or beneath sidewalk panels.

Interior of a residential garage with a bare concrete floor — typical slab for polyurethane lifting

Poor Compaction

Original install backfill that never fully consolidated.

Residential home with a backyard concrete patio — typical slab work polyjacking handles

Aging Trenches

Utility trenches installed years ago still settling beneath the surface.

Why Polyjacking Beats Grinding

A lighter, more precise repair option for settled sidewalks

Grinding looks fast and cheap. It’s also a band-aid: removes concrete (weakens the slab over time), doesn’t fix underlying soil issues, can create drainage problems, and doesn’t last.

Polyjacking stabilizes the soil beneath the slab, preventing future movement. It’s a fix, not a workaround.

Reduce Liability Without Replacement

What Polyjacking Eliminates

Polyjacking eliminates trip hazards without cutting or grinding the concrete, without removing slabs, without extended downtime, and without disruption to landscaping or adjacent slabs.

For HOAs, property managers, and commercial property owners, it’s the cleanest way to address slip-and-fall liability and ADA compliance without taking the walkway out of service for days.

When Replacement Is Right

Long-Term Stability for Sunken Concrete

A few situations where lifting isn’t the answer: the panel is severely cracked or shattered, multiple adjacent panels have failed structurally, or the concrete itself is deteriorated below load-bearing strength.

For most settlement-driven sidewalk issues, lifting is the right fix.

Uneven Sidewalk Repair FAQs

The most common questions about sidewalk leveling and trip hazard repair.

Why Polyjacking Is Ideal for Sidewalks

Six Reasons It's the Right Method

Precise Leveling

Foam injection brings panels back to within a fraction of an inch — accurate enough to meet ADA compliance and pedestrian-safety standards.

Minimal Disruption

Small access ports, no jackhammering, no slurry runoff. Sidewalks stay open during work and ready for foot traffic almost immediately.

ADA-Compliant Result

Lifted panels meet ADA tolerance for vertical changes in level — under 1/4 inch — without re-pouring, grinding, or replacing the slab.

Walkway Stays Open

Pedestrian access is restored within minutes of foam injection. Most sidewalk lifts complete during a normal business day with no closures.

Free Sidewalk Leveling Inspection

A trip hazard is liability waiting to happen. The fix is faster and cheaper than most homeowners and property managers expect.

Learn More About

Related Resources

Most sidewalk leveling projects in Kansas City run $700–$1,000 per panel.

Most panels are lifted in under an hour. Foam reaches load-bearing strength within 15–30 minutes.

Yes. The lifted panel is the same panel — just back at the right elevation.

Rarely. Grinding is a temporary fix that doesn’t address the underlying soil. Polyjacking lasts longer.